Catalogue

International Fiber VT1920WDMPELCO IFS Video with Two-Way PTZ Data, MM, 1 FIBER, PELCO

Home  »  Manufacturers  »  International Fiber  »  International Fiber VT1920WDMPELCO IFS Video with Two-Way PTZ Data, MM, 1 FIBER, PELCO  » 
International Fiber VT1920WDMPELCO IFS Video with Two-Way PTZ Data, MM, 1 FIBER, PELCO
Item code: VT1920WDMPELCO
Availability: Yes
$931.43
Retail Price:
$786.91
Sale Price:
16%
Save:
Qty: 

ITEM TOTAL: 






    International Fiber VT1920WDMPELCO IFS Video with Two-Way PTZ Data, MM, 1 FIBER, PELCO

    The VT1920WDMPELCO is the video transmitter and data transceiver module is designed for use in the Spectra III camera system. This module allows the dome camera to be connected directly to optical fiber, providing a fully integrated solution. This unit mounts directly into the dome’s enclosure, replacing the traditional power, data and coaxial cable connection. The IFS VT1900WDM-Pelco series allows for the simultaneous transmission of Video and PTZ Data over one multimode or single mode optical fiber. Now, an added feature built into the VT1900WDM-Pelco series is a logic signal input allowing an additional device such as a dome tamper switch, low pressure indicator or an event alarm, to be added and its signal transmitted back to the monitoring location. The optical output of the dome is compatible with the standard IFS VR1900WDM series receiver, and is designed for quick and easy installation into the Spectra III system utilizing one single mode optical fiber. In addition, the VT1900WDM-Pelco series transmitter is designed to be an integral part of the Spectra III system, there are no external electrical connections or additional hardware at the camera site.



    Features
  • FM Video Transmission
  • NTSC, PAL Compatible
  • Supports RS-422 Data Interface
  • Transparent to Data Encoding
  • Full Range Automatic Gain Control (AGC)
  • No external Power Supply Required
  • No In-field Electrical or Optical Adjustments Required
  • Integrated WDM for Greater Product Reliability
  • Distances up to 43 mile (69 km) without Repeaters
  • Available in FiberPak™
  • Comprehensive Lifetime Warranty

    Specifications
  • Video Output: 1 volt pk-pk (75 ohms)
  • Bandwidth: 5 Hz - 10 MHz (At 6 dB attenuation)
  • Differential Gain: <5%
  • Differential Phase: <5°
  • Tilt: <1%
  • Signal-to-Noise Ratio (SNR): >55 dB @ 10 dB attn.
  • Data Interface: RS-422
  • Wavelength: 1310/1550 nm, Multimode and Single Mode
  • Number Of Fibers: VTVR1900WDM-Pelco: 1
  • Optical: ST
  • Power:
  • VT1900WDM-Pelco: 12 VDC @ 90 mA
  • VR1900WDM: 12 VDC
  • Circuit Board: Meets IPC Standard
  • Size (in./cm) (LxWxH): 2.375 x 2.25 x .875 in., 8.6 x 5.715 x 2.2 cm
  • Shipping Weight: < 1/2 lb./.23 kg
  • MTBF: > 100,000 hours
  • Operating Temp: -40° C to +74° C
  • Storage Temp: -40° C to +85° C
  • Relative Humidity: 0% to 95% (non-condensing)†





Your Name:  
Message:  
Send