![]()
| - 4 PORT FIRE WIRE« REPEATER/HUB The VS-4FW and VS-8FW are high performance bidirectional hub/repeaters for 6-pin FireWire (IEEE 1394) signals. They will increase the number of ports available and/or will extend the distance of FireWire cable runs.
- Cascading Operation - multiple units can be cascaded to create a Firewire system with up to 63 ports.
- Range - Doubles Firewire cable range from 14.75' (4.5m) to 29.5' (9m). Multiple units can be cascaded to extend the range to up to 236' (72m).
- Hot Swapping - Supports plug and play.
- Transfer Rates - 100, 200, and 400Mbps.
- ESD Protection - Incorporates Kramer's Spark-Guard ProTM signal protection circuitry to help protect against EDS (electrostatic discharge) which can damage digital equipment.
- Compact Size - Part of the Kramer TOOLS™ family of compact, high quality and cost effectiv solutions.
PORTS:VS-4FW: Four 6-pin serial 1394 Ports VS-6FW: Six 6-pin serial 1394 Ports VS-8FW: Eight 6-pin serial 1394 PortsTRANSFER RATE:100/200/400 MbpsSTANDARDS:Fully supports the provisions of the IEEE 1394-1995 Standard for High Performance Serial Bus and the P1394a Supplement; Fully interoperable with FireWire™ and i.LINK™ implementation of IEEE Std 1394; Fully compliant with OpenHCI requirements; Provides Six P1394a Fully Compliant Cable Ports at 100/200/400 Megabits per Second (Mbps); Full P1394a support includes: Connection Debounce, Arbitrated Short Reset, Multispeed Concatenation, Arbitration Acceleration, Fly-By Concatenation, Port Disable/Suspend/Resume; Extended Resume Signaling for Compatibility with Legacy DV Devices; ESD protection for high-speed data lines to IEC 61000-4-2 (ESD) 15kV (air), 8kV (contact), IEC 61000-4-5 (Lightning) 12A (8/20us), and IEC 61000-4-4 (EFT) 40A (5/50ns)POWER SOURCE:VS-4FW: 12 VDC, 200mA VS-6FW: 12 VDC, 250mA VS-8FW: 12 VDC, 300mADIMENSIONS:12cm x 7.5cm x 2.5cm (4.7' x 2.95' x 0.98', W, D, H)WEIGHT:0.3 kg. (0.67 lbs.) approx.ACCESSORIES:12VDC power supply , mounting bracket, one 6 pin to 6 pin connector cableOPTIONS:RK-T3, RK-T1 rack adapters
|
