![]()
| - NEW: COMPOSITE OR Y/C AND (U) AUDIO OVER TWISTED PAIR RECEIVER (REQUIRES TP-9) The TP-9 and TP-10 are a twisted pair transmitter and receiver set for composite or s-Video (Y/C) signals and unbalanced analog stereo or S/PDIF digital audio signals. The TP-9 transmitter converts the video and audio to a twisted pair signal and the TP-10 converts the twisted pair signal back into video & audio signals.
- Bandwidth - > 70MHz (-3db)
- Audio - S/PDIF or unbalanced analog
- IR Repeater - 2 IR emitter Outputs (TP-9) & 1 sensor (TP-10)
- Twisted Pair Input/Outputs - RJ-45 connector
- System Range - up to 100 meters (320')
- Cable - UTP (unshielded twisted pair) such as CAT 5.
- Level (Gain) & EQ (Peaking) Controls - TP-10
- Compact Size - Part of the Kramer TOOLS™ family of compact, high quality and cost effective solutions
INPUTS:1 RJ-45 CAT-5 shielded connector (LINE IN)OUTPUTS:1 composite video 1Vpp/75? on a BNC connector; 1 s-Video 1Vpp/75? [Y], 0.3Vpp/75? [C] on a 4p connector; 1 S/PDIF (digital audio) on an RCA connector; 1 audio (analog audio) <8dBu on a 3.5mm mini connector;MAX. OUTPUT LEVEL:VIDEO: 2.6V; AUDIO: 4.6VppBANDWIDTH:VIDEO: >=70MHz/-3dB; AUDIO: 20Hz to 20kHz/0.1dBNON-LINEARITY:<0.05%DIFF. GAIN:<0.05%DIFF. PHASE:0.09DegS/N RATIO:VIDEO: >75dB RMS/5MHz weighted; AUDIO: >73dBAUDIO CONVERSION SAMPLE RATE:48kHzAUDIO CONVERSION RESOLUTION:24 bitsPOWER SOURCE:12VDC, 82mADIMENSIONS:12cm x 6.95cm x 2.76cm (4.7' x 2.8' x 1.08') W, D, HWEIGHT:0.3 kg (0.67 lbs.) approxACCESSORIES:Power Supply, 3.5mm to IR Emitter Control Cable (C-A35/IRE-10)OPTIONS:15 meter cable and 20 meter IR Emitter Extension Cables
|
