Bosch LTC880260 Series Allegiant Video Switcher/Control Systems

Home  »  Manufacturers  »  Bosch  »  Bosch LTC880260 Series Allegiant Video Switcher/Control Systems  » 
Bosch LTC880260 Series Allegiant Video Switcher/Control Systems
Item code: LTC880260
Availability: Yes
$4,235.57
Retail Price:
$3,578.34
Sale Price:
16%
Save:
Qty: 

ITEM TOTAL: 






    The LTC 8800 Series Allegiant Video Switcher/Control Systems combine both switching and computer technology to provide powerful performance and unique system features for the security user. Offering full matrix switching capability, these systems can be programmed to display the video from any camera on any monitor, either manually or via independent automatic switching sequences.

    LTC 8800 Series Allegiant Matrix/Control Systems - Modular

    • 256 Camera by 64 monitor switching

    • Expandable to larger matrix sizes

    • Modular construction

    • Powerful alarm handling capabilities

    • SalvoSwitching and SatelliteSwitch capability

    • PC-based software package available

    • Two-digit site plus 4-digit camera ID mode

    Certifications and Approvals

    Electromagnetic Compatibility
    (EMC)    		 Complies with FCC Part 15, ICES-003, and CEregulations. This product also complies with EN 50121-4 railway application standards. Refer to www.boschsecurity.com website for link to applicable documents.
    Product Safety Complies with CE regulations, UL, CSA, EN, and IEC Standards

    Technical Specifications

    LTC 8800 Series System Specifications
    Capacities
    Video Inputs Standard: 256
    Satellite configuration: 2048
    Video Outputs 64
    Keyboards 32
    Alarm Inputs 1024
    Receiver Drivers Standard: 256
    Satellite configuration: 2048
    Electrical
    Input Voltage Level 0.5 Vp-p to 2 Vp-p
    (composite negative sync)
    Gain Unity ± 4% (75 Ohm terminated)
    Pulse/Bar Ratios1 Min. 94% Nom. 98% Max. 106%
    2T Pulse K Factor1 Min. Nom. 0.2% Max. 2.5%
    Bar Amplitude (IRE) 1 Min. 96 Nom. 98 Max. 104
    Sync Amplitude (% Bar)1 Min. 36% Nom. 39% Max. 44%
    Field Time Waveform Distortion1 2% maximum
    Line Time Waveform Distortion1 1% maximum
    Short Time Waveform Distortion1 2% maximum
    Long Time Waveform Distortion1 0.8% maximum
    Video Bandwidth (-3 dB)2 15 MHz
    Frequency Response (± 0.5 dB)2 12 MHz
    Signal-to-Noise-Ratio1 70 dB at 3.58 MHz
    unified, unweighted minimum
    Crosstalk (at 3.58 MHz) Input to input: -60 dB
    Adjacent channel: -50 dB (typical)
    Hum 60 dB below the composite
    1 Vp-p video signal from 60 Hz to
    6 MHz
    Differential Gain1 Min. --- Nom. 0.6% Max. 2%
    Differential Phase1 Min. --- Nom. 0.6* Max. 1.3*
    Chrominance Luminance Gain1 Min. 96% Nom. 100% Max. 104%
    Chrominance Luminance Delay1 Min. -33 ns Nom. +3 ns Max. +33 ns
    Luminance Nonlinearity1 Min. --- Nom. 0.3% Max. 4%
    Switching Crosspoint matrix
    DC Output 0.34 V
    Transient Protection (VIM Cards) 350 W Peak Pulse Power
    (tp = 8/20 μs
    1 Meets EIA/TIA - 250C Medium Haul Standard for 256 cameras x 32 monitors.
    2 One camera to one monitor.
    Environmental
    Temperature
    Operating 4°C to 50°C (40°F to 122°F)
    Storage –40°C to 60°C (–40°F to 140°F)
    Altitude 4500 m (15,000 ft)
    Humidity  0% to 95% relative, non-condensing
    Vibration 3 g swept sine wave, 15 Hz to 2000 Hz
    Shock 50 g, 11 m/s, ½ sine wave
    LTC 8801 Series Main CPU Bay
    Includes equipment rack, LTC 8810/01 microprocessor module, and LTC 8805 Series power supply.
    Power
    Model No Rated Voltage Voltage Range Nominal Power3
    LTC 8801/60 120 VAC, 50/60 Hz 100 to 140 200 W
    LTC 8801/50 220-240 VAC, 50/60 Hz 198 to 264 200 W
    3 Power at rated voltage fully loaded.
    Connectors
    Video Inputs 1 to 96 One (1) sync Input, and 32 monitor outputs BNC
    Video Connections 97 to 256 Ten (10), 34-pin ribbon connectors used in con junction with the LTC 8808/00 video interconnect panel (purchased separately)
    Looping Video  Connections: 1
    to 256     		Sixteen (16), 34-pin ribbon connectors used in conjunction with the LTC°8808/00 video interconnect panel (purchased separately)
    External Accessory Interfaces
    Console 9-pin D-type RS-232 port for external PC or control interface (default = 19,200 baud)
    Alarm 9-pin D-type RS-232 port for Allegiant alarm accessory
    unit (default = 19,200 baud)
    Printer 9-pin D-type RS-232 port for system logging printer default = 19,200 baud)
    SDA 9-pin D-type TTL level, high-speed control data output
    (Bi-Phase) for interface to Allegiant series signal distribution units (data clock rate = 31.25 kHz)
    COMM Port 9-pin D-type RS-485 port for interbay communication
    use (default = 125,000 baud)
    COMM Port 9-pin D-type RS-485 port for external Allegiant accessory
    use (default = 125,000 baud)
    Keyboards Eight (8), 6-pin RS-485 ports for Allegiant keyboard use (default = 9600 baud)
    Equipment Rack (LTC 8801)
    Size (W x D x H) EIA 48 cm (19 in.) rack  483 x 420 x 267 mm (19 x 16.5 x 10.5 in.)
    Weight 11.1 kg (24.5 lb)
    Construction/Finish
    Top and Bottom Steel
    Front, Sides, and Back Aluminum
    Finish Charcoal
    Microprocessor Module (LTC 8810/01)
    Size (D x H) 300 x 250 mm (11.8 x 9.8 in.)
    Weight 0.5 kg (1.1 lb)
    Power Supply (LTC 8805/60–120 VAC, LTC 8805/50 –220-240 VAC)
    Size (W x D x H) 67 x 360 x 247 mm
    (2.63 x 14.2 x 9.7 in.)
    Weight 5.2 kg (11.5 lb)
    Indicators One power On/Off, ten fuse alert, and one external sync LED
    LTC 8802 Series Monitor Expansion Bay
    Includes equipment rack, LTC 8816/01 data receiver module, and LTC 8805 Series power supply.
    Power
    Model No. Rated Voltage Voltage Range Nominal Power4
    LTC 8802/60 120 VAC, 50/60 Hz 100 to 140 200 W
    LTC 8802/50 220–240 VAC,  50/60 Hz 198 to 264 200 W
    4. Power at rated voltage fully loaded.
    Connectors
    Video Inputs 1 to 96, and 32 monitor outputs BNC
    Sync Input Not used
    Video Connections: 97
    to 256    		 Ten (10), 34-pin ribbon connectors used in conjunction with the LTC 8808/00 video interconnect panel (purchased separately)
    Looping Video Con-nections: 1 to 256 Sixteen (16), 34-pin ribbon connectors used in conjunction with the LTC 8808/00 video interconnect  panel
    External Accessory Interfaces
    Console 9-pin D-type connector, not used
    Alarm 9-pin D-type connector, not used
    Printer 9-pin D-type connector, not used
    SDA 9-pin D-type connector, not used
    COM Port 9-pin D-type connector RS-485 port for interbay communication use (default = 125,000 baud)
    COM Port 9-pin D-type connector, not used
    Keyboards Eight (8), 6-pin RS-485 ports for Allegiant keyboard use (default = 125,000 baud)
    Equipment Rack (LTC 8802 Series)
    Size (W x D x H) EIA 48 cm (19 in.) rack, 483 x 420 x 267 mm (19 x 16.5 x 10.5 in.)
    Weight 11.1 kg (24.5 lb)
    Construction/Finish
    Top and Bottom Steel
    Front, Sides, and  Back Aluminum
    Finish Charcoal
    Data Receiver Module (LTC 8816/01)
    Size (W x D x H) EIA 48 cm (19 in.) rack, 483 x 420 x 267 mm (19 x 16.5 x 10.5 in.)
    Weight 0.5 kg (1.1 lb)
    Power Supply (LTC 8805/60–120 VAC, LTC 8805/50220–240 VAC)
    Size (W x D x H) 67 x 360 x 247 mm (2.63 x 14.2 x 9.7 in.)
    Weight 5.2 kg (11 5 lb)
    Indicators One power On/Off, ten fuse alert, and one external sync LED
    LTC 8821/00 Camera Input Module
    Use up to eight per bay in main CPU bay. If monitor expansion bay is being used, equip with duplicate number of modules.
    Camera Inputs 32
    Size (D x H) 300 x 250 mm (11.8 x 9.8 in.)
    Weight 0.41 kg (0.9 lb)
    LTC 8834/00 Monitor Output Module
    Use up to eight per bay in main CPU or monitor expansion bay.
    Monitor Outputs 4
    Size (D x H) 300 x 250 mm (11.8 x 9.8 in.)
    Weight 0.41 kg (0.9 lb)

    LTC 8808/00 Video Interconnect Panel
    NOTE: Use of the LTC 8808/00 assemblies are required for system video inputs 97 to 256 and must be purchased separately. The LTC 8808/00 assembly contains an interconnect panel which is used to convert 32 BNC connectors into two 16- channel ribbon cable connectors. The two, 16conductor
    ribbon cables (LTC 8809/00), designed especially for use with video signals, and are then used to interconnect the video between the panel and the LTC 8800 Series system. In addition to being used for video inputs 97 to 256, the LTC 8808/00 assembly can also be ordered as an option to provide looping output capability. For looping purposes, one LTC 8808/00 (includes one panel and two ribbon cables) is required for each group of 32 cameras.

    The following table can be used to determine the number of LTC 8808/00 assemblies that must be purchased:

    Number of System Cameras Number of LTC8808 Assemblies Required for Camera Input Connections Only Number of LTC 8808 Required for Inputs and Looping Video Outputs
    1 to 32 None 1
    33 to 64 None 2
    65 to 96 None 3
    97 to 128 1 5
    129 to 160 2 4
    161 to 196 3 9
    197 to 224 4 11
    225 to 256 5 13

    Finish

    Charcoal
    Size (W x D x H) EIA 48 cm (19 in.) rack, 483 x 42 x 44 mm (19 x 1.65 x 1.75 in.)
    Weight
    Panel 0.54 kg (1.2 lb)
    Ribbon Cables (2) 0.3 kg (0.7 lb)
    Allegiant Accessories

    The LTC 8800 Series accessory products provide many optional features to the base Allegiant switching systems. Accessory products include keyboard extension kits, Allegiant Bilinx Data Interface unit, receiver/driver units, switcher/followers, code merger units, the video ribbon cable and key- board expansion units. All accessory products are designed to be installer friendly and compatible throughout Allegiant series systems. See the Allegiant Accessories datasheet.






 Your Name:  
Message:  
Send