![]()
| ACTi SED2140 1-Channel MPEG-4 Video Server, Supports Up To Full D1 Resolution, With Two-Way Audio, Power Adapter, NVR Software
Tthe SED-2140 from ACTi has compact and well designed 1-channel video server uses the data efficient MPEG-4 ASP codec and supports 30 FPS at full D1 resolution. In addition to remote Internet viewing, this unit will provide PTZ and alarm capabilities to your analog camera, all accessible over the network.
Features
- MPEG-4 ASP compliant compression
- CIF up to Full D1 resolution at 30 FPS
- Dual MPEG-4 video stream output via LAN and WAN PPPoE supported ports at the same time
- QoS enabled L3 video streaming
- Digital time code embedded
- Hardware motion detection
- Two way audio supported
- Isolated digital input and output supported
Specifications
- Model: SED2140
- Compression Format: MPEG-4 ASP
- Picture Size: Full D1: 720 x 480, CIF: 352 x 240, QCIF: 160 x 112
- Frame Rate: 30 FPS at full D1 (720 x 480)
- Supported Protocols: TCP, UDP, IP, HTTP, DHCP, PPPoE, RTP, RTSP, FTP, SMTP, DNS, DDNS, NTP, ICMP, IGMP, ARP
- Web Browser Access: Microsoft Internet Explorer 6.0 or above
- Card Slot: No
- Video Input: BNC x1
- Video Output: BNC x1
- Audio Input: Mini x1 (3.5mm)
- Audio Output: Mini x1 (3.5mm)
- Control Port: RS-485/422/232
- PTZ Control: Supports Pelco-P type 1, Pelco-P type 2, Pelco-D, Dynacolor, Samsung, VCL, Videotrek, Kampro-V1, Kampro-V2
- Alarm I/O: 2 Alarm inputs, 2 alarm outputs (per channel)
- Network Interface: Ethernet (10/100 Base-T), RJ-45 connector
- Power Requirements: 12VDC
- Power Consumption: 7.5W
- Operating Temperature: 40 - 122°F (5 - 50°C)
- Dimensions (WxHxD): 4.4 x 1.5 x 4.7" (112 x 37 x 119mm)
- Weight: 0.7 lbs (350g)
|
